Cerrosafe is an alloy made of bismuth, lead, tin and cardmium. It is a non-eutectic alloy with a yield temperature of 162.5º F.
Cerrosafe Chemical Properties
This alloy melts between 158º and 190º F, considerably lower than the boiling point of water. The alloy contracts during first 30 minutes and after one hour is precisely the size of chamber. At the end of 200 hours, the alloy would swell by just about .0025 ″. This fact is especially considered by toolmakers while making dies or reamers or gauges from casts.
Cerrosafe Use For Making A Cast For Gun Chamber
One popular use of this substance is in making a cast for gun chamber. It is recommended because of its unique features. As this alloy contracts marginally for a few minutes after solidification, it simplifies removal from long castings. This is quite different from Woodsmetal, which expands after cooling and cannot be removed from a gun chamber. This alloy can be used for a precise bore measurement. One needs to measure dimension only approximately after an hour in order to get the exact measurement.
Precautions While Using Cerrosafe
This alloy is suggested to be melted in a neat, iron dipper. Heat sources should be removed once it melts entirely and is ready to be poured. If possible, pour molten cerrosafe through a small tube into the base of the cast, progressively removing the tube as the chamber packs. In case the barrel is cold, it should be warmed to room temperature or above before making the cast. Solidified casting must be detached from the chamber either before or when it cools to room temperature. This is because if left in the container over an hour, cerrosafe mixture would stick to chamber walls and become hard to remove. Next, clean the chamber of the rifle thoroughly. Plug the bore of the throat with a small cloth, but not so firmly that it could not be driven out.
Other Popular Uses Of Cerrosafe
Cerrosafe alloy was initially used for toy soldier castings. Cerrosafe is also used for casting cavities such as threads, dies and molds. It is used for casting blind holes, duplicate prototypes in foundry match plate patterns and holding work pieces while boring. Cerrosafe is deployed for spray-coating wooden designs, dental lab appliances, electroplating masks.
Repetitively Re-Melted and Reusage of Cerrosafe
Casts can be repetitively re-melted and reused for other purposes. However, one should be careful to avoid overheating Cerrosafe as it will make it ineligible to use it for recurring purpose.
Top 5 Articles In Chemistry Guides
What is Bicuculline? It is a plant alkaloid that consists of GABA antagonist properties. It is used for analysis ...
Bacteriocin Definition It is a form of protein that is produced by bacteria. It inhibits or kills the growth ...
Sulfurous Acid Definition Sulfurous Acid is a chemical compound which has a formula H2SO3, and is a weak and unstable ...
Rising concern about escalating price of fossil fuel and their impact on environment has made it necessary to search ...
Though some animals of nature may seem very beautiful, but in reality they can be very dangerous. The animals ...